|
|
|
|
|
| 348A |  Air Filter Adaptor - 2 1/2" od (fits: HL304wxa carb) |
$14.00 | |
| 4220A |  Intake Manifold - use with HL360D carb (fits Briggs Flathead) |
$40.00 | |
| AN-I |  Intake Manifold - use with HL304wxa, HL304wxg carbs (fits Briggs Animal) |
$33.00 | |
| F21-501-30 |  Burris HL388B Tillotson Carb - Gas - 2 stack carb - 0.790" Venturi - 1.000" Throttle Bore (fits: 196cc Clone - 212cc Predator) |
$120.00 | |
| F21-501-40 |  Burris HL388B Tillotson Carb - Alcohol - 2 stack carb - 0.790" Venturi - 1.000" Throttle Bore (fits: 196cc Clone - 212cc Predator) |
$130.00 | |
| F21-502-20 |  Air Filter Adaptor - made by Burris - 2 1/4" OD (fits: HL388B carb) |
$13.00 | |
| F21-506-10 |  Tillotson Throttle Kit - made by Burris (fits: HL388B, HL304wxa, HL304wxg carbs) |
$14.50 | |
| GXC-503-00 |  Intake Manifold - made by Burris - use with HL388B carbs (fits: 196cc Clone - 212cc Predator) |
$42.50 | |
| HL-304WXA |  HL304wxa Tillotson Carb - Alcohol - 3 stack carb - 0.900" Venturi - 1.000" Throttle Bore (fits: Briggs Animal - 196cc Clone - 212cc Predator) |
$120.00 | |
| HL-304WXG |  HL304wxg Tillotson Carburetor - Gas - 2 stack carb - 0.900" Venturi - 1.000" Throttle Bore (fits: Briggs Animal - 196cc Clone - 212cc Predator) ***SOLD OUT and no longer available*** |
$120.00 | |
| HL-360D |  HL360D Tillotson Carb - Alcohol - 3 stack carb - 0.945" Venturi - 1.060" Throttle Bore (fits Briggs Flathead) ***SOLD OUT and no longer available*** |
$125.00 | |
| HL-6876 |  Intake Manifold - made by ARC - use with HL304wxa, HL304wxg carbs (fits 196cc Clone - 212cc Predator) |
$45.00 | |
| T96 |  Tillotson Manifold Gasket (use between manifiold and carb) |
$1.00 | |
| T97 |  Tillotson HL Carb Kit - 7 piece - fits 3 stack carb - high performance diaphragm and gasket kit - works with all fuels used in racing applications |
$6.00 | |
| T98 |  Tillotson HL Carb Kit - 5 piece - fits 2 stack carb - high performance diaphragm and gasket kit - works with all fuels used in racing applications |
$6.00 | |
| TTK812 |  Tillotson Throttle Linkage Kit - use with HL360D carb - for right side "needle side" hookup (fits Briggs Flathead) |
$10.00 |