|
|
|
|
1315NAC | 15 tooth Noram Cheetah Clutch - 2 disc - 6 spring - 3 1/2" disc diameter (engagement 3900-4000 rpm - 4 cycle - 3/4" - #35 chain) | $225.00 | |
463000 | Snap Ring - Noram Cheetah | $1.50 | |
CBK-1 | Clutch Bolt Kit (Install in this order: 5/16"-24 x 3/4" bolt, 5/16" lock washer, 5/16" large od washer, the last piece on the bolt is the 5/16" small od washer - this will act as a step washer extending the length of the crankshaft by .062") | $1.50 | |
CK-1 | Clutch Key - 3/16" x .150" thick x 5/8" long - fits: bully, cheetah, tomar (10 pack) | $7.50 | |
CK-11 | Clutch Key - 3/16" x .150" thick x 5/8" long - fits: bully, cheetah, tomar (1 key) | $1.50 | |
NAC012 | Pressure Plate - Noram Cheetah | $40.00 | |
NAC043 | Adjusting Screw - Noram Cheetah (6 needed) | $3.00 | |
NAC157 | Dowel Pin - Noram Cheetah (6 needed) | $1.50 | |
NAC214 | Inner Thrust Washer - Noram Cheetah (.875" x 1.375" x .030") | $3.00 | |
NAC215 | Outer Washer - Noram Cheetah (.875"x1.170"x.030") | $5.50 | |
NAC228 | Black Spring .085" - Noram Cheetah (6 needed) | $5.00 | |
NAC249 | Friction Disc - Noram Cheetah (2 needed) | $17.50 | |
NAC250 | Floater Disc .090" thick - Noram Cheetah | $17.50 | |
NAC253 | Lever - Noram Cheetah (6 needed) | $4.00 | |
NAC254 | Lever Support - Noram Cheetah | $40.00 | |
NAC437 | Spring Retainer - Noram Cheetah (6 needed) | $2.00 | |
NAC695 | Drum Housing - Noram Cheetah | $50.00 | |
NAC786 | Drive Hub - Noram Cheetah | $75.00 | |
NAU12 | 12T Noram Clutch Gear (fits: Cheetah, Stinger - #35 chain) | $26.00 | |
NAU13 | 13T Noram Clutch Gear (fits: Cheetah, Stinger - #35 chain) | $26.00 | |
NAU14 | 14T Noram Clutch Gear (fits: Cheetah, Stinger - #35 chain) | $26.00 | |
NAU15 | 15T Noram Clutch Gear (fits: Cheetah, Stinger - #35 chain) | $26.00 | |
NAU16 | 16T Noram Clutch Gear (fits: Cheetah, Stinger - #35 chain) | $26.00 | |
NAU17 | 17T Noram Clutch Gear (fits: Cheetah, Stinger - #35 chain) | $26.00 | |
NAU18 | 18T Noram Clutch Gear (fits: Cheetah, Stinger - #35 chain) | $26.00 |